Laipni aicināti Schneider Electric tīmekļa vietnē

Laipni lūdzam mūsu tīmekļa vietnē!

Varat izvēlēties citu valsti, lai skatītu pieejamo produkciju, vai apmeklēt mūsu globālo tīmekļa vietni, lai skatītu informāciju par uzņēmumu.

Izvēlieties citu valsti vai reģionu

    ATV61H075M3S337 attēlu etiķete Schneider Electric
    Pārtraukts

    Esošie produkti: Altivar 61

    Variable speed drives

    ATV61H075M3S337

    ATV61H075M3S337 attēlu etiķete Schneider Electric
    Pārtraukts
    Esošie produkti: Altivar 61

    Variable speed drives

    ATV61H075M3S337

    variable speed drive ATV61 - 0.75kW 1HP - 200...240V - IP20 - reinforced

    Rādīt vairāk raksturlielumus >
    ATV61H075M3S337 nav aizstāts. Lūdzu, sazinieties ar savu klientu speciālists, lai iegūtu vairāk informācijas.

    • Main
      range of product
      Altivar 61
      product or component type
      Variable speed drive
      product specific application
      Pumping and ventilation machine
      component name
      ATV61
      motor power kW
      0.37 kW single phaseat 200...240 V
      0.75 kW 3 phasesat 200...240 V
      motor power hp
      1 hp 3 phasesat 200...240 V
      0.5 hp single phaseat 200...240 V
      [Us] rated supply voltage
      200...240 V (- 15...10 %)
      network number of phases
      3 phases
      Single phase
      line current
      5.3 Afor 240 V 3 phases 0.75 kW / 1 hp
      5.8 Afor 240 V single phase 0.37 kW / 0.5 hp
      6.1 Afor 200 V 3 phases 0.75 kW / 1 hp
      6.9 Afor 200 V single phase 0.37 kW / 0.5 hp
      EMC filter
      Class C2 EMC filter integrated
      variant
      Reinforced version
      assembly style
      With heat sink
      apparent power
      1.4 kVAfor 240 V single phase 0.37 kW / 0.5 hp
      2.2 kVAfor 240 V 3 phases 0.75 kW / 1 hp
      prospective line Isc
      5 kA 3 phases
      5 kA single phase
      maximum transient current
      3.6 Afor 60 s single phase
      5.7 Afor 60 s 3 phases
      nominal switching frequency
      12 kHz
      switching frequency
      1...16 kHz adjustable
      12...16 kHz with derating factor
      asynchronous motor control profile
      Voltage/frequency ratio, 2 points
      Voltage/frequency ratio, 5 points
      Flux vector control without sensor, standard
      Voltage/frequency ratio - Energy Saving, quadratic U/f
      synchronous motor control profile
      Vector control without sensor, standard
      communication port protocol
      CANopen
      Modbus
      type of polarization
      No impedance for Modbus
      option card
      APOGEE FLN communication card
      BACnet communication card
      CC-Link communication card
      Controller inside programmable card
      DeviceNet communication card
      Ethernet/IP communication card
      Fipio communication card
      I/O extension card
      Interbus-S communication card
      LonWorks communication card
      METASYS N2 communication card
      Modbus Plus communication card
      Modbus TCP communication card
      Modbus/Uni-Telway communication card
      Multi-pump card
      Profibus DP communication card
      Profibus DP V1 communication card
      Complementary
      product destination
      Asynchronous motors
      Synchronous motors
      supply voltage limits
      170...264 V
      supply frequency
      50...60 Hz (- 5...5 %)
      network frequency
      47.5...63 Hz
      continuous output current
      3 Aat 12 kHz, 230 V single phase
      4.8 Aat 12 kHz, 230 V 3 phases
      output frequency
      0.1...599 Hz
      speed range
      1...100 in open-loop mode, without speed feedback
      speed accuracy
      +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback
      torque accuracy
      +/- 15 % in open-loop mode, without speed feedback
      transient overtorque
      130 % of nominal motor torque, +/- 10 %for 60 s
      braking torque
      30 % without braking resistor
      <= 125 % with braking resistor
      regulation loop
      Frequency PI regulator
      motor slip compensation
      Adjustable
      Automatic whatever the load
      Can be suppressed
      Not available in voltage/frequency ratio (2 or 5 points)
      local signalling
      1 LED red presence of drive voltage
      output voltage
      <= power supply voltage
      isolation
      Between power and control terminals
      type of cable
      With an IP21 or an IP31 kit: 3-strand IEC cableat 40 °C, copper 70 °C PVC
      Without mounting kit: 1-strand IEC cable at 45 °C, copper 70 °C PVC
      Without mounting kit: 1-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR
      With UL Type 1 kit: 3-strand UL 508 cable at 40 °C, copper 75 °C PVC
      electrical connection
      AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm² / AWG 14
      L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 6 mm² / AWG 8
      tightening torque
      AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 0.6 N.m
      L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 1.4 N.m / 12.3 lb.in
      supply
      Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <= 10 mAfor overload and short-circuit protection
      Internal supply 24 V DC (21...27 V), <= 200 mAfor overload and short-circuit protection
      External supply 24 V DC (19...30 V)
      analogue input number
      2
      analogue input type
      AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign
      AI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bits
      AI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
      sampling duration
      Discrete input LI6 (if configured as logic input) 2 ms, +/- 0.5 ms
      Analog input AI1-/Al1+ 2 ms, +/- 0.5 ms
      Analog input Al2 2 ms, +/- 0.5 ms
      Analog output AO1 2 ms, +/- 0.5 ms
      Discrete input LI1...LI5 2 ms, +/- 0.5 ms
      accuracy
      AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °C
      AI2 +/- 0.6 % for a temperature variation 60 °C
      AO1 +/- 1 % for a temperature variation 60 °C
      linearity error
      AI1-/Al1+ +/- 0.15 % of maximum value
      AI2 +/- 0.15 % of maximum value
      AO1 +/- 0.2 %
      analogue output number
      1
      analogue output type
      AO1 software-configurable current, analogue output range 0...20 mA, impedance 500 Ohm, resolution 10 bits
      AO1 software-configurable logic output 10 V, <= 20 mA
      AO1 software-configurable voltage, analogue output range 0...10 V DC, impedance 470 Ohm, resolution 10 bits
      discrete output number
      2
      discrete output type
      (R1A, R1B, R1C) configurable relay logic NO/NC, electrical durability 100000 cycles
      (R2A, R2B) configurable relay logic NO, electrical durability 100000 cycles
      response time
      <= 100 ms in STO (Safe Torque Off)
      R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 ms
      R2A, R2B <= 7 ms, tolerance +/- 0.5 ms
      minimum switching current
      Configurable relay logic 3 mA at 24 V DC
      maximum switching current
      R1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1, 0 ms
      R1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4, 7 ms
      R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1, 0 ms
      R1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4, 7 ms
      discrete input number
      7
      discrete input type
      (LI1...LI5) programmable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm
      (LI6) switch-configurable, 24 V DC, voltage limits <= 30 V, with level 1 PLC, impedance 3500 Ohm
      (LI6) switch-configurable PTC probe, 0...6, impedance 1500 Ohm
      (PWR) safety input, 24 V DC, voltage limits <= 30 V, impedance 1500 Ohm
      discrete input logic
      LI1...LI5 positive logic (source), < 5 V (state 0), > 11 V (state 1)
      LI1...LI5 negative logic (sink), > 16 V (state 0), < 10 V (state 1)
      LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), < 10 V (state 1)
      LI6 (if configured as logic input) positive logic (source), < 5 V (state 0), > 11 V (state 1)
      acceleration and deceleration ramps
      Automatic adaptation of ramp if braking capacity exceeded, by using resistor
      Linear adjustable separately from 0.01 to 9000 s
      S, U or customized
      braking to standstill
      By DC injection
      protection type
      Drive against exceeding limit speed
      Drive against input phase loss
      Drive break on the control circuit
      Drive input phase breaks
      Drive line supply overvoltage
      Drive line supply undervoltage
      Drive overcurrent between output phases and earth
      Drive overheating protection
      Drive overvoltages on the DC bus
      Drive power removal
      Drive short-circuit between motor phases
      Drive thermal protection
      Motor motor phase break
      Motor power removal
      Motor thermal protection
      insulation resistance
      > 1 mOhm at 500 V DC for 1 minute to earth
      frequency resolution
      Analog input 0.024/50 Hz
      Display unit 0.1 Hz
      connector type
      1 RJ45 for Modbus on front face
      1 RJ45 for Modbus on terminal
      Male SUB-D 9 on RJ45 for CANopen
      physical interface
      2-wire RS 485 for Modbus
      transmission frame
      RTU for Modbus
      transmission rate
      20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
      4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal
      9600 bps, 19200 bps for Modbus on front face
      data format
      8 bits, 1 stop, even parity for Modbus on front face
      8 bits, odd even or no configurable parity for Modbus on terminal
      number of addresses
      1...247 for Modbus
      1...127 for CANopen
      method of access
      Slave for CANopen
      marking
      CE
      operating position
      Vertical +/- 10 degree
      product weight
      3 kg
      width
      130 mm
      height
      230 mm
      depth
      175 mm
      Environment
      noise level
      43 dB conforming to 86/188/EEC
      dielectric strength
      2830 V DC between earth and power terminals
      4230 V DC between control and power terminals
      electromagnetic compatibility
      Conforming to IEC 61000-4-2 level 3
      Conforming to IEC 61000-4-11
      Conforming to IEC 61000-4-6 level 3
      Conforming to IEC 61000-4-3 level 3
      Conforming to IEC 61000-4-4 level 4
      standards
      EN 55011 class A group 1
      EN 61800-3 environments 1 category C2
      EN 61800-3 environments 2 category C2
      EN/IEC 61800-3
      EN/IEC 61800-5-1
      IEC 60721-3-3 class 3C2
      UL Type 1
      product certifications
      CSA
      C-Tick
      DNV
      GOST
      NOM 117
      UL
      pollution degree
      2 conforming to EN/IEC 61800-5-1
      IP degree of protection
      IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529
      IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1
      IP21 conforming to EN/IEC 60529
      IP21 conforming to EN/IEC 61800-5-1
      IP41 on upper part conforming to EN/IEC 60529
      IP41 on upper part conforming to EN/IEC 61800-5-1
      IP54 on lower part conforming to EN/IEC 60529
      IP54 on lower part conforming to EN/IEC 61800-5-1
      vibration resistance
      1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
      1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6
      shock resistance
      15 gn for 11 ms conforming to EN/IEC 60068-2-27
      relative humidity
      5...95 % without condensation conforming to IEC 60068-2-3
      5...95 % without dripping water conforming to IEC 60068-2-3
      ambient air temperature for operation
      -10...50 °C without derating
      50...60 °C with derating factor
      ambient air temperature for storage
      -25...70 °C
      operating altitude
      <= 1000 m without derating
      1000...3000 m with current derating 1 % per 100 m
      Contractual warranty
      Warranty period
      18 months